English
Български
END TO THE PROBLEMS WITH HUMID AIR!
KILL ECOLOGICALLY THE MOULD!
INEXPENSIVE, ECONOMICAL, HEALTHY.
Ventilation is very important for our health.
When the condensation is controlled (it starts at humidity levels above 70-75%), it is easier to cease the process of room aging. In this way, you avoid unpleasant smells, mould and condensation formation.
One way to control the humidity level is the revolutionary flow system "Eco-Fresh 05", equipped with a hydrostat, active carbon filter, and heater to be used in the cold winter days, guaranteeing fresh air supply at room temperature. Thanks to its construction, "Eco-Fresh 05" work very silently and, furthermore, acts as a noise-proof device. The incoming air is fresh (filtered)and ionised.
- Code: 17.04
- Manufacturer: Nederman
1. Outer grid - protects the system from humidity and rain.
2. Active carbon filter - guarantees fresh air supply even in highly contaminated urban and industrial areas. Cleans the air from smells, dust, bacteria, soot, automobile gases, etc. When the outer environment is very polluted, it is recommended that the filter is changed two-three times a year.
3. Fine filter - to be used in very dusty regions.
4. A valve - stops the incoming cold air and insects when the fan is not working.
5. A duct with carving (limiting device) (fig.1) - used for adjusting the length of the fan according to the thickness of the wall.
6. A fan - equipped with a revolution regulator, controlling the air flow from 30m3/h (in night, silent work regime) to 120m3/h (in day regime).
7. Heater 300W - economical, designed for impusle work. Keeps the incoming air temperature at 25оC.
IMPORTANT!
In temperature outside less than -10оС, it is necessary to reduce the fan revolutions in order to acquire incoming air temperature 25оС.
8. Thermostat – controls the heater and guarantees 25оС of the incoming air temperature.
9. Ionisator - purifies, disinfects and freshens the air. Clears the air from specific and unpleasant smells. Destroys the microorganisms. Protects from mould and condensation.
10. Decorative grid
11. Control unit - includes a regulator, circuit breakers, hydrostat system, humidity sensor, timer.
- Humidity sensor - guarantees that the system is working every time when the humidity in the room goes above 70% - 75% and there are conditions for condensation and mould formation.
- Timer - assures that the fan is working 5 minutes more after the humidity level goes below 70% - 75%.
11.1. Regulator - regulates fluently the fan revolutions from 900min-1 to 650 min-1 by changing the quantity of the incoming air from 30m3/h to 120m3/h.
11.2. Circuit breakers.
All prices include VAT!
Facebook Fan Page